IEEE 400.2 2013 PDF



Ieee 400.2 2013 Pdf

IEEE 400.2 2013 GUIDE FOR FIELD TESTING OF SHIELDED. VLF cable test voltages and time durations are set by IEEE Standard 400.2-2013. There are no “rules of thumb” to be used. These numbers result from many years of VLF field use and research. Download .pdf Contact HVI Testing Summary . The above information describes VLF Withstand testing, where the intent of the test is to apply a sufficient test voltage for a long enough time to permit any, IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). IEEE Power and Energy Society. Sponsored by the Insulated Conductors Committee . IEEE 3 Park Avenue IEEE Std 400.2-2013 New York, NY 10016-5997 USA. 31 May 2013 IEEE Std 400.2-2013. IEEE Guide for Field Testing of.

IEEE 400.2 2013 GUIDE FOR FIELD TESTING OF SHIELDED

MEDIUM VOLTAGE CABLE PREDICTIVE DIAGNOSTICS TECHNIQUE. IEEE 400.2-2013: IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) [IEEE] on Amazon.com. *FREE* shipping on qualifying offers., IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz).Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide..

VLF cable test voltages and time durations are set by IEEE Standard 400.2-2013. There are no “rules of thumb” to be used. These numbers result from many years of VLF field use and research. Download .pdf Contact HVI Testing Summary . The above information describes VLF Withstand testing, where the intent of the test is to apply a sufficient test voltage for a long enough time to permit any Title: IEEE 400 2-2013_VLF.pdf Author: RaGarcía Created Date: 11/15/2017 12:01:48 PM

IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). IEEE Power and Energy Society. Sponsored by the Insulated Conductors Committee . IEEE 3 Park Avenue IEEE Std 400.2-2013 New York, NY 10016-5997 USA. 31 May 2013 IEEE Std 400.2-2013. IEEE Guide for Field Testing of IEEE 400.2, the IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) IEEE 400.3, the IEEE Guide for Partial Discharge Testing of Power Cable Systems in a Field Environment IEEE 400.4, the IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage 1 General Cable - Cable Installation

IEEE 400.2 PDF - IEEE Std ™ I. EEE Standards. TM. IEEE Guide for Field Testing of Shielded Power. Cable Systems Using Very Low. "IEEE Guide for Field Testing and Organization also revises standards for submarine power cables and cable-pulling lubricants. The IEEE recently approved IEEE 400.2, “Guide for Field Testing of Shielded power Cable Systems Using Very Low Frequency (VLF), a new standard that addresses concerns when field-testing shielded, medium-voltage cables related to the use of cables having extruded dielectric insulation.

ieee guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz) / note: approved 2013-03-06 ieee in the premature failure of extruded solid dielectric cables led to the development of IEEE docuements - "IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems" and IEEE 400.2 "Guide for Testing of Shielded Power Cable Systems using Very Low Frequency (VLF)".

IEEE 400.2 PDF - IEEE Std в„ў I. EEE Standards. TM. IEEE Guide for Field Testing of Shielded Power. Cable Systems Using Very Low. "IEEE Guide for Field Testing and IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2в„ў-2013

1700 J. Perkel et al.: Interpretation of Dielectric Loss Data on Service Aged Polyethylene Based Power Cable Systems Collation of more than 2000 individual dielectric loss data from different cable systems in the field. Selection and discussion of traditional and new diagnostic features such as absolute loss magnitude, changes in loss IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013

buy ieee 400.2 : 2013 guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz) from sai global IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2в„ў-2013

IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). Inform now! buy ieee 400.2 : 2013 guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz) from sai global

VLF testing paper. IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. View all product details, V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by.

IEEE 400.2 2013 GUIDE FOR FIELD TESTING OF SHIELDED

Ieee 400.2 2013 pdf

OVE webshop IEEE 400.2-2013. ieee 400 2 2013 pdf. clipart in ms word 2013 2013 word clip art. pin. Passive Techniques for Detecting Session Hijacking Attacks in IEEE figure 3 : pin. 400-201 Updated Exam PDF (Questions & Answers) pin. The Future, Data Centers and 400 Gigabit Ethernet - The Data Gigabit Ethernet: pin. Valerie Maguire В» Standards Informant В» Page 2 PoDL Class Power Requirements Matrix for PSE, PI, and PD, Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 5 June 2012 IEEE Power & Energy Society IEEE Std 400в„ў-2012 (Revision of IEEE Std 400-2001) IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above Authorized licensed use limited to: Universidad Tecnica Federico Santa Maria..

IEEE 400 2-2013 VLF CLIC-PATSA

Ieee 400.2 2013 pdf

IEEE 400.2 Janvier 2004 - Groupe AFNOR. Title: IEEE 400 2-2013_VLF.pdf Author: RaGarcГѓВ­a Created Date: 11/15/2017 12:01:48 PM https://ro.wikipedia.org/wiki/Condensator_electrolitic 1700 J. Perkel et al.: Interpretation of Dielectric Loss Data on Service Aged Polyethylene Based Power Cable Systems Collation of more than 2000 individual dielectric loss data from different cable systems in the field. Selection and discussion of traditional and new diagnostic features such as absolute loss magnitude, changes in loss.

Ieee 400.2 2013 pdf

  • IEEE-400.2-PDF IEEE Guide for Field Testing of Shielded
  • Standard IEEE 400.2-2013 9.6.2013
  • Interpretation of Dielectric Loss Data on Service Aged

  • ieee 400 2 2013 pdf. clipart in ms word 2013 2013 word clip art. pin. Passive Techniques for Detecting Session Hijacking Attacks in IEEE figure 3 : pin. 400-201 Updated Exam PDF (Questions & Answers) pin. The Future, Data Centers and 400 Gigabit Ethernet - The Data Gigabit Ethernet: pin. Valerie Maguire В» Standards Informant В» Page 2 PoDL Class Power Requirements Matrix for PSE, PI, and PD IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2в„ў-2013

    Instantly Download The IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz). Download To Any Device & Read Right Now Without Waiting For Shipping. Instantly Download The IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz). Download To Any Device & Read Right Now Without Waiting For Shipping.

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Edition: 2013 $147.00 Unlimited Users - 1 Loc per year IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. Languages: English Historical Editions: IEEE …

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). IEEE Power and Energy Society. Sponsored by the Insulated Conductors Committee . IEEE 3 Park Avenue IEEE Std 400.2-2013 New York, NY 10016-5997 USA. 31 May 2013 IEEE Std 400.2-2013. IEEE Guide for Field Testing of Anotace textu normy IEEE 400.2-2013 : Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide.

    V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. View all product details

    • IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage. § IEEE 400.2 - 2013 • IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (Less Than 1 Hz). § IEEE 400.3 - 2006 IEEE 400.2 : Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)

    Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 5 June 2012 IEEE Power & Energy Society IEEE Std 400™-2012 (Revision of IEEE Std 400-2001) IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above Authorized licensed use limited to: Universidad Tecnica Federico Santa Maria. IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage Abstract: The application of Damped ac (DAC) for field testing of power cables is described. DAC voltage withstand testing and diagnostic tests and measurements that are performed in combination with DAC voltage application in the field on shielded power cable …

    IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage Abstract: The application of Damped ac (DAC) for field testing of power cables is described. DAC voltage withstand testing and diagnostic tests and measurements that are performed in combination with DAC voltage application in the field on shielded power cable … IEEE 400.2 : Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)

    IEEE 400.2 2013 IEEE Guide for Field Testing of Shielded

    Ieee 400.2 2013 pdf

    Search Results for ""IEEE 400.2"". ieee 400 2 2013 pdf. clipart in ms word 2013 2013 word clip art. pin. Passive Techniques for Detecting Session Hijacking Attacks in IEEE figure 3 : pin. 400-201 Updated Exam PDF (Questions & Answers) pin. The Future, Data Centers and 400 Gigabit Ethernet - The Data Gigabit Ethernet: pin. Valerie Maguire » Standards Informant » Page 2 PoDL Class Power Requirements Matrix for PSE, PI, and PD, V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by.

    MEDIUM VOLTAGE CABLE PREDICTIVE DIAGNOSTICS TECHNIQUE

    IEEE-400.2-PDF IEEE Guide for Field Testing of Shielded. IEEE 400.2-2013: IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) [IEEE] on Amazon.com. *FREE* shipping on qualifying offers., IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013.

    buy ieee 400.2 : 2013 guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz) from sai global Instantly Download The IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz). Download To Any Device & Read Right Now Without Waiting For Shipping.

    • IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage. § IEEE 400.2 - 2013 • IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (Less Than 1 Hz). § IEEE 400.3 - 2006 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Edition: 2013 $147.00 Unlimited Users - 1 Loc per year

    IEEE 400 Series-2013 IEEE Shielded Power Cable Systems. This bundle of IEEE Shielded Power Cable Systems standards comprise of IEEE Std 400-2012, IEEE Std 400.1-2007, IEEE Std 400.2-2013 and IEEE … buy ieee 400.2 : 2013 guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz) from nsai

    Download E-books IEEE 400.2-2013: IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) PDF Organization also revises standards for submarine power cables and cable-pulling lubricants. The IEEE recently approved IEEE 400.2, “Guide for Field Testing of Shielded power Cable Systems Using Very Low Frequency (VLF), a new standard that addresses concerns when field-testing shielded, medium-voltage cables related to the use of cables having extruded dielectric insulation.

    V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. Languages: English Historical Editions: IEEE …

    IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013 in the premature failure of extruded solid dielectric cables led to the development of IEEE docuements - "IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems" and IEEE 400.2 "Guide for Testing of Shielded Power Cable Systems using Very Low Frequency (VLF)".

    IEEE-400.2-PDF IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Annotation of standard text IEEE 400.2-2013 : Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide.

    IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. View all product details Title: IEEE 400 2-2013_VLF.pdf Author: RaGarcГѓВ­a Created Date: 11/15/2017 12:01:48 PM

    (2013-06-09) Supersedes: IEEE 400.2-2004 Withdrawn: Price: NOK 1 786,00 (excl. VAT) NOK 2 232,50 (with VAT) Scope: Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever • IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage. § IEEE 400.2 - 2013 • IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (Less Than 1 Hz). § IEEE 400.3 - 2006

    ieee 400.2 pdf - buy ieee guide for field testing of shielded power cable systems using very low frequency (vlf) (less than 1 hz). 13 jun guided ieee series (bundle) IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2в„ў-2013

    IEEE 400.2-2013: IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) [IEEE] on Amazon.com. *FREE* shipping on qualifying offers. IEEE-400.2-PDF IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)

    IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013 VLF cable test voltages and time durations are set by IEEE Standard 400.2-2013. There are no “rules of thumb” to be used. These numbers result from many years of VLF field use and research. Download .pdf Contact HVI Testing Summary . The above information describes VLF Withstand testing, where the intent of the test is to apply a sufficient test voltage for a long enough time to permit any

    in the premature failure of extruded solid dielectric cables led to the development of IEEE docuements - "IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems" and IEEE 400.2 "Guide for Testing of Shielded Power Cable Systems using Very Low Frequency (VLF)". IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). Inform now!

    IEEE 400 Series-2013 IEEE Shielded Power Cable Systems. IEEE 400 Series-2013 IEEE Shielded Power Cable Systems. This bundle of IEEE Shielded Power Cable Systems standards comprise of IEEE Std 400-2012, IEEE Std 400.1-2007, IEEE Std 400.2-2013 and IEEE …, Organization also revises standards for submarine power cables and cable-pulling lubricants. The IEEE recently approved IEEE 400.2, “Guide for Field Testing of Shielded power Cable Systems Using Very Low Frequency (VLF), a new standard that addresses concerns when field-testing shielded, medium-voltage cables related to the use of cables having extruded dielectric insulation..

    ieee 400 2 2013 pdf PngLine

    Ieee 400.2 2013 pdf

    IEEE 400.2-2013 Techstreet. Abstract: Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems are treated in a similar manner to individual cables. Tables are included as an aid to identifying the effectiveness of the VLF ac voltage test for various, IEEE 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) standard by IEEE, 06/09/2013. View all product details.

    IEEE-400.2-2013 IEEE Guide for Field Testing of Shielded. IEEE-400.2-PDF IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz), IEEE 400.2 Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz).

    ieee 400 2 2013 pdf PngLine

    Ieee 400.2 2013 pdf

    400.2-2013 IEEE Guide for Field Testing of Shielded. Organization also revises standards for submarine power cables and cable-pulling lubricants. The IEEE recently approved IEEE 400.2, “Guide for Field Testing of Shielded power Cable Systems Using Very Low Frequency (VLF), a new standard that addresses concerns when field-testing shielded, medium-voltage cables related to the use of cables having extruded dielectric insulation. https://en.wikipedia.org/wiki/Comparison_of_Google_Nexus_smartphones IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage Abstract: The application of Damped ac (DAC) for field testing of power cables is described. DAC voltage withstand testing and diagnostic tests and measurements that are performed in combination with DAC voltage application in the field on shielded power cable ….

    Ieee 400.2 2013 pdf


    IEEE 400.2-2013 Title. IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Abstract. Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Edition: 2013 $147.00 Unlimited Users - 1 Loc per year

    VLF cable test voltages and time durations are set by IEEE Standard 400.2-2013. There are no “rules of thumb” to be used. These numbers result from many years of VLF field use and research. Download .pdf Contact HVI Testing Summary . The above information describes VLF Withstand testing, where the intent of the test is to apply a sufficient test voltage for a long enough time to permit any Anotace textu normy IEEE 400.2-2013 : Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide.

    IEEE Std 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) The information contained in this guide is intended to provide the methodology, voltages, and factors to be considered when utilizing VLF ac voltage testing, whether as a withstand test or as a diagnostic test. IEEE Std 400.2-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) The information contained in this guide is intended to provide the methodology, voltages, and factors to be considered when utilizing VLF ac voltage testing, whether as a withstand test or as a diagnostic test.

    V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2™-2013

    V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by IEEE 400 Series-2013 IEEE Shielded Power Cable Systems. This bundle of IEEE Shielded Power Cable Systems standards comprise of IEEE Std 400-2012, IEEE Std 400.1-2007, IEEE Std 400.2-2013 and IEEE …

    • IEEE Std 400.2 Cons • Still discussion on test levels versus test time • Issues with charge injection and trapped charge when testing at frequencies less than 0.1 Hz • Not as effective in finding weak spots in the insulation as a conventional AC HiPot. • Voltage wave may not be sinusoidal (depends on test kit). IEEE 400.2 Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2™-2013 V. DIAGNOSTIC TEST METHODS – IEEE STANDARDS According to IEEE 400 all cable tests can be categorized into two major types: type 1, destructive withstand, and type 2, non-destructive diagnostic. In section 8.1, the IEEE 400 guide states, “if the test falls under the criteria of a withstand by

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Edition: 2013 $147.00 Unlimited Users - 1 Loc per year The recommended practices and procedures for direct voltage acceptance and maintenance testing of shielded, laminated, dielectric-insulated power cable systems rated 5 kV to 500 kV are presented in this guide. It applies to all types of laminated power cable systems such as paper insulated, lead covered, pipe-type, and pressurized cables that are intended for the transmission or distribution

    (2013-06-09) Supersedes: IEEE 400.2-2004 Withdrawn: Price: NOK 1 786,00 (excl. VAT) NOK 2 232,50 (with VAT) Scope: Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever IEEE 400.2-2013 Title. IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) Abstract. Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems

    IEEE 400.2 PDF - IEEE Std в„ў I. EEE Standards. TM. IEEE Guide for Field Testing of Shielded Power. Cable Systems Using Very Low. "IEEE Guide for Field Testing and Annotation of standard text IEEE 400.2-2013 : Revision Standard - Active. Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide.

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz) Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 31 May 2013 IEEE Power and Energy Society IEEE Std 400.2в„ў-2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). IEEE Power and Energy Society. Sponsored by the Insulated Conductors Committee . IEEE 3 Park Avenue IEEE Std 400.2-2013 New York, NY 10016-5997 USA. 31 May 2013 IEEE Std 400.2-2013. IEEE Guide for Field Testing of

    Abstract: Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems are treated in a similar manner to individual cables. Tables are included as an aid to identifying the effectiveness of the VLF ac voltage test for various IEEE 400 Series-2013 IEEE Shielded Power Cable Systems. This bundle of IEEE Shielded Power Cable Systems standards comprise of IEEE Std 400-2012, IEEE Std 400.1-2007, IEEE Std 400.2-2013 and IEEE …

    IEEE 400.2 - 2013 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz). Inform now! • IEEE Std 400.2 Cons • Still discussion on test levels versus test time • Issues with charge injection and trapped charge when testing at frequencies less than 0.1 Hz • Not as effective in finding weak spots in the insulation as a conventional AC HiPot. • Voltage wave may not be sinusoidal (depends on test kit).